GE WBVH6240 Technical Service Manual page 43

Note: Place the door on a soft protected fl at surface
so that the door glass faces up. (The door should
rest on the handle side)
3. Remove the 8 Phillips-head screws that hold the
door cover and door strike to the door frame.
4. Grasp and unsnap the door cover from the door
frame.
5. Lift the door glass out of the door frame.
Door Glass
6. Remove the 5 Phillips-head screws from the
protect cover and ring.
7. Release the 2 tabs that hold the protect cover
and ring from the door frame.
Plastic Window
8. Slide the protect cover and ring away from the
handle side of the door frame.
Note: The door handle and door frame are replaced
as an assembly. (Part # WH46X10125)
Door Handle
– 43 –
Tab
Tab
Door Frame