Door Strike - GE WBVH6240 Technical Service Manual

2. Use a long-nose pliers to grasp the wire loop at
the spring location and expand it to clear the
gasket.
3. Remove the spring and wire from the gasket.
4. Pull the right side of the gasket away from the
front panel.
5. Pull the door lock to the opening and remove the
3 wire harnesses.
Release Ring
– 27 –
Note: The door latch is solenoid activated. It can
remain locked after power is removed.
To manually unlock door:
1. Disconnect the washer from electrical supply.
WARNING: To avoid injury, ensure all mechanical
movement has stopped.
2. Remove the service panel. (See
3. Reach behind and up the right side of the front
panel, pull the release ring down, then open the
door.

Door Strike

To remove the door strike:
1. Open the door.
2. Remove the 2 Phillips-head screws that hold the
door strike to the door frame cover.
Door Strike
Door Frame Cover
3. Remove the door strike.
Note: The door strike position on the door can be
horizontally adjusted 1 / -inch. Adjust position of the
8
door strike for best door closure.
)
Service Panel.