GE WBVH6240 Technical Service Manual page 16

To stack the dryer:
Caution: Do not lay dryer on its back. Use the
packing material or a protective surface when
laying dryer on its side.
1. Carefully lay the dryer on its side.
2. Use an open end wrench or pliers to remove the
4 dryer leveling legs from the leg brackets.
y
Back out and remove
all 4 leveling legs
g g
Leg bracket
– 16 –
3. Remove the adhesive backing and fi rmly place
the 4 rubber pads over the leg brackets.
4. Align the holes in the left bracket with the holes
in the bottom left corner of the dryer. Attach
the bracket using 2 (#12 x 1-in.) Phillips-head
screws.
5. Align the holes in the right bracket with the holes
in the bottom right corner of the dryer. Attach
the bracket using 2 (#12 x 1-in.) Phillips-head
screws.
(Continued Next Page)