Layout Of The Remote Control - Swann DVR4-2000 Operating Instructions Manual

Layout of Remote Control
1
2
3
4
5
1) 0 ~ 9 (Numeric Buttons): Used
to input numbers. 1 ~ 4 can be used
as quick channel changing buttons
in a similar manner to a television,
and these will work during either live-
viewing mode or playback. Additionally,
the numeric buttons will be used when
inputting any numerical information –
most often, your password.
2) ALL: Activates or deactivates the
entire area shown on screen to be
armed for Motion Detection recording
mode. Motion Detection will need to
be correctly configured for this button
to function as described.
3, 7, 8, 9 & 10) Arrow Buttons: Moves
the cursor in the appropriate direction
when navigating menus.
5) Record: Press to immediately start
recording. This acts as a manual override
to the schedule and motion recording
modes. For a channel to be recorded in
this mode (or any other) it must listed as
'active' in the Camera Setup and Record
Setup menus.
10
6) Menu: One of the primary controls
for navigating through the menus.
When in live-viewing mode, it will enter
6
the main menu. When pressed in the
7
main menu, it will return the DVR to
8
live-viewing mode. Finally, when in a
9
submenu, this button will return you to
10
11
the main menu.
12
13
7) SEL (Select): The equivalent of Enter/
14
15 Return on a computer keyboard. Use
this button to (as the name suggests)
select an option in the menus, or to
confirm an entry.
11) Mute: Will not affect the function
of this DVR.
12) Play: If pressed in live-viewing
mode, this will take you directly into
playback mode, and begin playing the
most recent recording. In playback
mode, use it to resume playback after
pausing or stopping a recording.
4) Rewind: During playback, this will
reverse the footage. Press multiple times
to increase the speed of the reversing.
13) Fast-Forward: During playback,
this will increase the speed of playback.
Press multiple times to increase the
speed of playback further.
14) Stop: In playback mode, pressing
this button will stop playback.
15) Pause: During playback, will pause
the current recording and leave a still-
frame on screen. In live-viewing mode,
this will activate the auto-sequence
mode, where the display automatically
cycles through the available camera
signals (this must be correctly configured
and enabled to function correctly).