Table of Contents
Advertisement
Cruise Mode
To setup CRUISE MODE, you'll need to
define "POINTS" for each channel with
a PTZ camera you want to "cruise".
A POINT is one place that the camera
needs to move to on its loop.
•
Move the camera to the desired position using the arrows.
•
Hit the SET button.
•
The point will be saved. Its name will be one digit higher than the previous
point.
•
For easy cruise setup, define your points in the same order as you want the
camera to move through them.
The GOTO button will take the camera back to a predefined point. The CLEAN
button will remove all your defined points.
When you've set your points, select SAVE, then EXIT.
•
To start cruise mode, select START CRUISE from
the pop-up menu.
•
To stop cruise mode, select STOP CRUISE form
the same menu.
Remember: After making changes to the settings press/click the APPLY button.
47
Hide quick links:
Advertisement
Table of Contents
