Layout Of Remote Control - Swann DVR16-2600 Operating Instructions Manual

Layout of Remote Control

1) REC: Initiates manual recording.
2) SEARCH: Opens the Video Search menu.
3) 2x2, 3x3, 4x4 (Viewing Modes): Changes
how many channels are displayed on the screen
at a time. You can choose from 4 (2x2), 9 (3x3)
or all 16 (4x4). Press the button multiple times to
1
2
cycle which channels are displayed.
4) 0 ~ 9 (Numerical Buttons): You can use
3
these buttons to enter or select numerical values.
4
In live viewing mode, they are shortcuts to the
associated channel.
5
5) AUTO: Starts or stops the auto-rotate
6
function.
6) DISPLAY MODE: Cycles through all available
7
viewing modes and layouts.
8
7) UP, DOWN, LEFT, RIGHT (Arrow Buttons):
9
Used to navigate through menus, enter
10
information, change channels and operate PTZ
11
devices.
12
8) ENTER (aka Select): Selects an item, confirms
a choice or ends a process.
13
9) MENU / ESC: Opens the Main Menu, or goes
14
back one step from a submenu.
10) MUTE: Toggles MUTE on or off. While muted,
the DVR will record audio, but not send it to the
television (or other audio output device).
11) PIP (Picture In Picture): Initiates picture
in picture mode. Press multiple times to cycle
through PIP options. Press MENU / ESC to exit PIP
mode.
12) Playback Controls: Operates the playback
interface of the DVR. They operate in much the
same way as the controls on a DVD player.
13) PTZ Controls: For controlling a Pan, Tilt,
Zoom device. The features that you can control
depends on the make and model of the PTZ
device you have.
14) LOCK: Locks the DVR. You'll need a passcode
to unlock it again.
8