Swann DVR4-2000 Operating Instructions Manual page 62

NetViewer - Setup (continued)
62
Setup: Alarm
Here you'll find the same options as in
the Alarm Menu in the DVR. These can be
customized in the same manner as they
would be from the menu on the DVR itself.
You can access the motion detection area
definition screen from the ALARM menu.
This works in the same manner as the same
screen within the DVR menu. The red squares
indicates the area which will be sensitive to
motion.
Setup: Network
Here you can change the network settings for
the DVR in the same manner as the Network
menu in the DVR itself (see pages 22 & 23 for
more details). You will need to restart both
the DVR and the NetViewer software after
making any dramatic changes. Remember to
update your login information if you change
the ports numbers or IP address of the DVR.
Setup: Setting
Here you'll be able to change the settings for
NetViewer. You can alter:
• The location on your PC where any
footage you back up will be stored.
• The speed at which your network or
Internet connection can upload data.
Setting this properly will give you the
best quality video possible without
overloading your connection.
• Your passwords. You'll need to be logged
in as an administrator (as opposed to a
user) to change this.
• You can also turn automatic adjustments
for daylight savings time on or off.