Table Of Alarm Codes Of The Lcd Display Board - Electrolux WASHING MACHINES Service Manual

Alarm Description
Communication incongruence between main
E92 PCB- display board
(versions not compatible)
E93
Incorrect configuration of appliance
E94 Incorrect configuration of washing cycle
Communication error between microprocessor
E95
and EEPROM
Incongruence between programme selector
E97
and cycle configuration
EB1 Frequency of appliance incorrect
EB2
Voltage too high
EB3
Voltage too low
Solenoid valve inoperative but flow meter
EC1
operating
EC2
Signal from turbidity sensor out of limits
EC3 Signal from weight sensor out of limits
Drain filter blocked
EF1
(too long drain phase)
Overdosing of detergent
EF2
(too much foam during drain phases)
EF3
Control water intervention
EF4
No alarm
Drain filter blocked
E00
(too long drain phase)

13.6 Table of alarm codes of the LCD display board

Alarm Description
E91
Communication error
E93
Configuration error
Communication error between microprocessor
E95
and EEPROM
Communication error between microprocessor
E98
and clock
SOI/DT 2005-01 dmm
Possible fault
Wrong control/display board;
Wrong PCB (do not correspond to the model).
Incorrect configuration data; PCB faulty.
Incorrect configuration data; PCB faulty.
PCB faulty.
Faulty PCB (Wrong configuration data).
Power supply problems (incorrect / disturbance); PCB faulty.
Power supply problems (incorrect / disturbance); PCB faulty.
Power supply problems (incorrect / disturbance); PCB faulty.
Main board defective, Solenoid valve defective
Turbidity sensor defective, Main board defective, Wiring defective
Weight sensor defective, Main board defective, Wiring defective
Drain tube blocked/kinked/too high;
Drain filter dirty/blocked.
Excessive detergent dosing; drain tube kinked/blocked;
Drain filter dirty/blocked.
Water leakage on the base; faulty water control device.
---
Drain tube blocked/kinked/too high;
Drain filter dirty/blocked.
Possible fault
Display board faulty
Display board faulty
Display board faulty
Display board faulty
60/67
Action/machine status
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle stops with door locked (after 5
attempts).
---
---
Warning displayed at the end of cycle
(specific LED)
(specific LED)
Water drain and cycle blocked
---
Warning displayed at the end of cycle
(specific LED)
Action/machine status
The cycle continues
Cycle interrupted (after 5 attempts)
The cycle continues
The cycle continues
599 36 82-57
Reset
---
OFF/reset
OFF/reset
OFF/reset
OFF/reset
---
---
---
OFF/reset
Start/reset
Start/reset
---
---
OFF/reset
---
---
Reset
-----------
OFF
-----------
-----------