Operating Time Counter; Operating Time Reading; Displaying The Operating Time With Lcd - Electrolux WASHING MACHINES Service Manual

14 OPERATING TIME COUNTER

It is possible to display, with a specific procedure, the operating time of the appliance, which is counted
from the first switching on.
This option is available only in models with display. The maximum memorization capacity is 6550 operating
hours.
Only the operating time of normal programmes is displayed (not diagnostics cycles)
The actual time of the cycle performed is counted (not the pauses, the delayed start time, rinse hold
and the soak phases)
The memorization is 30 seconds for each programme
Only operating hours are displayed (1h and 59min = 1h)
14.1.1

Operating time reading

1. Reset the set programme and switch the appliance off.
2. Press the START/PAUSE and EXIT buttons simultaneously, then, holding
the buttons down, switch the appliance on by rotating the programme
selector of three positions clockwise.
3. Hold the buttons down till WORKING HOURS appears on the second line
(about 5 seconds).

14.1.2 Displaying the operating time with LCD

In appliances with LCD display the displaying of the operating time is represented in the second line
"WORKING HOURS" and the working hours of the appliance are displayed where usually the end of cycle
time appears.
SOI/DT 2005-01 dmm 61/67 599 36 82-57