Table Of Alarm Codes - Electrolux EWM3500 Service Manual

9.12 Table of alarm codes

Alarm
Tap closed or water pressure too low; Drain tube improperly positioned; Water fill
solenoid valve is faulty; Leaks from water circuit on pressure switch; Pressure switch
E11
faulty; Wiring faulty; PCB faulty.
Drain tube improperly positioned; Water pressure too low;
Water fill solenoid valve is faulty; Water circuit on pressure switch is leaking/clogged;
E13
Pressure switch faulty.
Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain pump
faulty; Pressure switch faulty; Wiring faulty; PCB faulty; Electrical current leak between
E21
heating element and ground.
Drain pump faulty; Wiring faulty; PCB faulty.
E23
PCB faulty.
E24
Pressure switch;
Wiring;
E31
Main PCB.
Tap is closed or water pressure is too low;
Solenoid valve;
E32
Water circuit on pressure switch; pressure switch;
Wiring; main board.
Water fill solenoid valve is faulty; Leaks from water circuit on pressure switch; Pressure
E35
switch faulty; Wiring faulty; PCB faulty.
Water circuit on pressure switches;
Pressure switches;
E38
Motor belt broken.
PCB faulty.
E3A
Door lock unit faulty; Wiring faulty;
E41
PCB faulty.
Door lock unit faulty; Wiring faulty;
E42
PCB faulty; Electrical current leak between heating element and ground.
Door lock unit faulty; Wiring faulty;
E43
PCB faulty.
PCB faulty.
E44
PCB faulty.
E45
PCB faulty; current leakage from motor or from wiring.
E51
Motor faulty; wiring faulty; PCB faulty.
E52
PCB faulty.
E53
PCB faulty; current leakage from motor or from wiring.
E54
Motor defective; Wiring defective on inverter for motor, inverter board defective.
E57
SOI/DT 2007-02 dmm
Possible fault Action/machine status
Cycle is paused with door locked.
Cycle is paused with door locked.
Cycle is paused (after 2 attempts).
Safety drain cycle - Cycle stops with door unlocked.
Safety drain cycle - Cycle stops with door unlocked.
Cycle stops with door locked.
Cycle is paused.
Cycle stops. Safety drain cycle. Drain pump continues
to operate (5 min. on, then 5 min. off, etc.).
Heating phase is skipped.
Cycle stops with door locked.
Cycle is paused.
Cycle is paused.
(Safety drain cycle) Cycle stops.
(Safety drain cycle) Cycle stops.
(Safety drain cycle) Cycle stops.
Cycle blocked, door locked (after 5 attempts).
Cycle blocked, door locked (after 5 attempts).
Cycle blocked.
Cycle blocked, door locked (after 5 attempts).
Cycle stops with door locked (after 5 attempts).
57/66
Reset
START/RESET
START/RESET
START/RESET
RESET
RESET
RESET
START/RESET
RESET
ON/OFF RESET
RESET
START/RESET
START/RESET
ON/OFF RESET
ON/OFF RESET
ON/OFF RESET
RESET
RESET
RESET
RESET
RESET
599 38 61-92