Advertisement
D19
Connect wiring from the motor to the wiring cover plate.
D21
H
Secure the motor by tightening the 2 screws.
D23
O N
O F F
Test the motor. If the motor does not run, check the plug
connection.
16
D20
H
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
the motor and the housing.
D22
Turn on the power source.
D24
Go to step
E1
on page 17
to attach grille.
41721-01 12/25/2004
Attaching the Grille
E1
H
J
Remove the thumbscrews.
E3
H
K
Slide light mount over posts.
E5
K
L
Align dome and push up.
41721-01 12/25/2004
E2
K
L
M
Remove dome.
E4
K
J
Attach thumbscrews.
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
E6
L
M
Screw dome into position.
17
Advertisement
