Advertisement
3
H
E
Remove the motor/blower from the housing.
5
Remove the pre-loaded screw tip covers.
7
G
Remove the wiring cover screw.
4
4
Remove packing material.
6
Back out the pre-loaded screw tips until flush
with the side of the housing.
8
F
Remove the wiring cover.
41721-01 12/25/2004
9
E
Pop out the first wiring access slug. Use second if needed.
Choose Installation Option
For New Construction - attaching to joist go to step A11, page 5
For New Construction - suspended between joists go to step B11, page 8
For Existing Construction - accessible from above go to step C11, page 11
For Existing Construction - accessible only from below go to step D11, page 14
New Construction - attaching to joist
A11
5/8
1/2
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
41721-01 12/25/2004
10
C
B
Insert the strain relief into the housing and
secure with the washer.
A12
E
5/8
1/2
Screw pre-loaded screws into joist or framing.
5
Advertisement
