System Board - HP Pavilion G6 Maintenance And Service Manual

8. Remove the keyboard (see
9. Remove the top cover (see
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
2. Remove the power connector from the the base enclosure (2).
Reverse this procedure to install the power connector.

System board

Description
For use only with computer models equipped with HM76 UMA video memory
For use only with computer models equipped with 2048 MB of dedicated discrete video memory
For use only with computer models equipped with 1024 MB of dedicated discrete video memory
System board thermal pad kit (includes replacement thermal material)
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
Keyboard on page 45).
Top cover on page 48).
Battery on page 34).
Service door on page 35).
Component replacement procedures
Spare part number
680568-001
680570-001
680569-001
680571-001
65