Rtc Battery - HP Pavilion G6 Maintenance And Service Manual

RTC battery

Description
RTC battery (includes cable and double-sided tape)
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
7. Remove the hard drive (see
8. Remove the keyboard (see
9. Remove the top cover (see
10. Remove the system board (see
Remove the RTC battery:
1. Turn the system board upside down, with the front toward you.
2. Disconnect the RTC battery cable (1) from the system board.
3. Remove the RTC battery (2) from the system board. (The RTC battery is attached to the system
board with double-sided tape.)
Reverse this procedure to install the RTC battery.
68 Chapter 4 Removal and replacement procedures
Battery on page 34).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 45).
Top cover on page 48).
System board on page
35).
36).
38)
65).
Spare part number
637193-001