Specifications; Fuel And Lubricating Oil Requirements; Fuel And Lubrication Oil Filters; Oil Pan Capacity - Detroit Diesel 60 Operator's Manual

SPECIFICATIONS

This section lists the fuel and
lubrication oil filters needed for the
Series 60 engine. Also listed as
the various POWER COOL engine
products.
Filter Type
Primary — Spin-On
Primary Fuel/Water Separator — Spin-On
Secondary — Spin-On
Primary — Fuel Pro 380/382 Element
™
* Elemax extended service element (optional).
† Optional. May be used in place of, but not together with, the primary
filter.
‡ Used on engines equipped with DDEC V.
Table 26 Fuel Filters – Series 60 Regular Service
Filter Type
Full Flow
Full Flow (High Capacity)
Table 27 Lubricating Oil Filters

OIL PAN CAPACITY

All Series 60 truck oil pans (front
sump and rear sump) require the same
amount of engine oil
Oil Pan Capacity — 26 quarts to
the LOW mark without oil filters
All information subject to change without notice.
DDC-SVC-MAN-0039
SERIES 60 ON-HIGHWAY ENGINE OPERATOR'S GUIDE
Copyright © 2009 DETROIT DIESEL CORPORATION
Fuel and Lubricating Oil
Filters
The fuel filters and their part numbers
are listed in Table 26. The lubricating
oil filters and their part numbers are
listed in Table 27.
Detroit Diesel Part Number
23530706
†
23512317
23530707 or 23533726‡
23521528 or 23529168*
Detroit Diesel Part Number
23530573
DELF3998
32 quarts to the FULL mark without
oil filters
Total Oil Capacity Of The
Engine — 40 quarts to the FULL
mark with oil filters installed and
filters and oil galleries charged.
†
137