Specifications; Fuel And Lubricating Oil Filter Requirements; Oil Pan; Oil Pan Capacity - Detroit Diesel 50 Series Operator's Manual

SPECIFICATIONS

SPECIFICATIONS
This section lists the fuel and
lubrication oil filters needed for the
Series 50 engine. Also listed as the
various Power Cool ® engine products
Filter Type
Primary — Spin-On
Primary Fuel/Water Separator
— Spin-On †
Secondary — Spin-On
Primary — Fuel Pro 380/382 Element
# Elemax™ extended service element (optional).
† Optional. May be used in place of, but not together with, the primary
filter.
Table 34 Fuel Filters — Series 50 Regualr Service
Filter Type
Full Flow
Full Flow (High Capacity)
Table 35 Lubricating Oil Filters

Oil Pan

All Series 50 truck oil pans (front
sump and rear sump) require the same
amount of engine oil.
Oil Pan Capacity — 19 quarts to
the LOW mark without oil filters. 22
154
6SE550 0401 Copyright © 2004 DETROIT DIESEL CORPORATION
Fuel and Lubricating Oil
Filters
The fuel filters and their part numbers
are listed in Table 34. The lubricating
oil filters and their part numbers are
listed in Table 35.
Detroit Diesel Part No.
23530706
†
23512317
22530707
23521528 or 23529168#
Detroit Diesel Part No.
23530573
DELF3998
quarts to the FULL mark without oil
filters.
Total Oil Capacity Of The
Engine — 29 quarts to the FULL
mark with oil filters installed and
filters and oil galleries charged.
All information subject to change without notice. (Rev. 01/ 04)