Table of Contents
Advertisement
Basic Functions
Making a Call
1. Remove the handset from the base and press
2. Dial the telephone number.
Making a Call – Standby Mode
1. Enter the telephone number (up to 32 digits). Use
Use the Erase soft key to correct mistakes.
2. Press
to dial the number.
Receiving a Call
When a call is received, the IN USE indicator on the base will blink. Normally,
the caller's phone number will be displayed. If the caller cannot be identified,
only the NEW CALL information will display.
1. If Auto Answer has been activated and the handset is in the base, lift the
handset to answer the call.
2. Otherwise, press
Note:
• After the call is terminated, the display will show the call duration. If a
polyphonic ringtone is set, the ringtone may continue for up to four seconds
after the call is answered at another phone.
• To change the ringer volume, press
Mute
During a conversation, the microphone of the 8012 can be muted so that
the distant party cannot hear what is being said. To mute the microphone,
press MUTE soft key. The display will show "CALL MUTED". To un-mute the
microphone, press MUTE soft key again.
Volume Control
During a conversation, pressing
speakerphone volume level. Volume can be adjusted in five steps.
10
to answer.
or
.
to enter a pause.
or
while the phone is ringing.
will adjust the handset receiver or
Advertisement
Table of Contents
