Cortelco 8012 Instruction Manual page 11

Basic Functions
Message Waiting
• If a voice message is received, the display will show the
"MSG WGT ON".
• To deactivate the
hold the 4 key. Finally, press
"MSG WGT ON".
Ringer Settings
Perform the following steps to change the ringer tone or volume. These
settings can apply to either external calls (from the telephone company) or
internal calls (from other handsets registered to the same base).
1. Press the MENU soft key.
2. Press or
3. Press the SELECT soft key.
4. Press or
5. Press the SELECT soft key.
6. Press the SELECT soft key to choose INT RING, or press the
EXT RING.
7. Press the SELECT soft key.
8. Press or
9. Press the SELECT soft key.
10. Choose the desired ring tone (1 to 10) or desired volume (1 to 5 or off).
The 8012 will play the selected melody or volume level.
11. Press the SAVE soft key to confirm.
Last Number Redial
1. Press or the REDIAL soft key in standby mode. The display will show the
last number dialed.
2. Press
to dial the number.
(cont'd)
icon, press the
to return to standby mode.
to choose Handset Settings.
to choose Ring Setup.
to choose MELODY or VOLUME.
key in standby mode, then press and
icon and
to choose
11