Table of Contents
Advertisement
Battery Installation
1. Two rechargeable Ni-MH AAA size batteries come with the 8012. These must
be installed before use.
2. Slide the battery cover in the direction shown and remove.
3. Install the batteries as shown. Care MUST be taken to install in the correct
polarity. The 8012 may be damaged if batteries are inserted in the incorrect
polarity.
4. Reinstall the battery cover.
5. Replace the batteries when they fail to return to a full charge after
recharging. Use only Ni-MH rechargeable batteries. Never use other battery
types such as alkaline.
Charging Handset
1. The handset should be charged for 15 hours
before initial use. To charge the handset, place it
in the base.
2. To turn the handset off, press
display turns off.
3. To turn the handset on, press
display turns off.
4. If the handset is able to find a base, the display
will show the handset number, the handset
name (if one is assigned), the signal icon and
the current time. If the handset cannot find a
base, it will display "Searching ..."
8
until the
until the
Advertisement
Table of Contents
