Basic Functions
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the
n
Making a Call
1. Pick up the handset and press the
Result: The
In use
icon appears on the LCD.
2. Dial a telephone number.
3. To end the call, either press the
or replace the handset on the base.
Note
:
To make a call to the last number you dialed,
use the
Redial
feature. For details, see page
17.
key.
indicator flashes and the
key.
You can enter the desired phone number in
standby mode, which allows you to make
corrections before dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits).
Check it. You can also use the
insert a pause.
key
Note
:
If you make a mistake while entering a
number, press the
the last digit.
2. When the number appears correctly, press
the
Erase
soft key to clear
key.
key to
16