Avaya 9630 User Manual page 13

Note: Press the number key that corresponds to the letter or number you want to enter
until the letter or number is displayed. Pause before entering the next character if the
characters are on the same key. Enter remaining letters or numbers. If you want to delete
the last character, press Bksp. If you want to remove a letter, number, space, or symbol
that is in the middle of the text you entered, use the left and right navigation arrows to
place your cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor. To change
between upper and lower case letters, or to enter numbers, press More > Abc. To cycle
through the options (Abc/123/abc/ABC), press ABC again to until the type you want to
use is displayed. To enter characters that are not on your dialpad, press More > Symbols
and select the symbol you want to use then press OK to select the symbol. To delete all
text and start over, press Clear.
4. Select the next field.
5. Enter the (primary) telephone number.
6. Select the next field.
7. Select the type of number entered (general, work, mobile, home).
8. If you have another number for this contact, repeat Steps 5 through 7. You can add up to
three numbers for this contact.
9. Press Save or OK.
The new contact is saved.
o
To add an entry from the call log to your Contacts list:
1. Press Call Log.
2. Select the number you want to add to your Contacts list.
3. Press +Contact.
4. Edit the name and telephone number, if necessary.
5. Press Save.
The new entry is added to the Contacts list.
o
To edit an existing contact:
1. Press Contacts.
2. Select the contact you want to edit.
3. Press More > Edit.
4. Choose the field you want to edit.
5. Use the dialpad and softkeys to make changes to the contact information.
6. Press Save or OK.
Your changes are saved.
o
13