Yamaha YZFR1W 2007 Service Manual page 80

1. Fuel tank
2. O-ring
3. Fuel hose
4. Fuel tank drain hose
5. Fuel tank breather hose
6. Air filter stay
7. Clip
8. Fuel tank bracket
9. Fuel hose clamp
10.Fuel pump assembly
A. Install the lip of O-ring facing upward.
B. Install the part pointing the white paint part
of the hose to the left side of the vehicle.
C. Point the clip grip to the inside of the vehi-
cle.
D. Fuel piping connector attachment direc-
tions. (fuel pump side)
Always use hands to connect/disconnect
the connector without using tool.
E. Insert the connector until the click sound is
heard and check that the connector does
not come off.
Make sure that no foreign matter is caught
in the sealing section.
(It is prohibited to wear the cotton work
gloves or equivalent coverings.)
F. After item "E" mentioned above is finished,
check that the clamp is inserted from the
down side "a", "b" and "c" sections are per-
fectly equipped.
G. This part works as a dropout stopper.
H. Fuel piping connector attachment direc-
tions. (engine side)
Always use hands to connect/disconnect
the connector without using tool.
I. After Step "H" as above is finished, check
that the connector is completely attached
by sliding the double lock (orange part) "d"
on the connector as shown in the illustra-
tion and seeing if it touches firmly or not.
2-52
CABLE ROUTING