Yamaha YZFR1W 2007 Service Manual page 192

5. Swingarm
6. Pivot shaft
A. Left side
B. Right side
3. Install:
• Pivot shaft "1"
Pivot shaft
7 Nm (0.7 m·kg, 5.1 ft·lb)
NOTE:
Tighten the pivot shaft with the damper rod
holder (22 mm) "2".
Damper rod holder (22 mm)
90890-01365
4. Install:
• Pivot shaft ring nut "1"
Pivot shaft ring nut
65 Nm (6.5 m·kg, 47 ft·lb)
NOTE:
• Lubricate the pivot ring nut threads and mat-
ing surfaces with lithium-soap-based grease.
• Tighten the pivot shaft ring nut with the ring
nut wrench "2".
Ring nut wrench
90890-01507
YM-01507
5. Install:
• Pivot shaft nut "1"
Pivot shaft nut
105 Nm (10.5 m·kg, 76 ft·lb)
NOTE:
Lubricant the pivot shaft nut threads and mat-
ing surfaces with lithium-soap-based grease.
6. Adjust:
• Drive chain slack
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" on page 3-26.
Drive chain slack
30.0–40.0 mm (1.18–1.57 in)
4-70
SWINGARM