• Headlight bulb coupler (high beam)
11. Install:
• Intake air duct panel
Refer to "GENERAL CHASSIS" on page 4-
1.
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Remove:
Front cowling inner panels
Refer to "GENERAL CHASSIS" on page 4-
1.
2. Adjust:
• Headlight beam (vertically)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the adjusting screw "1" in direction "a"
or "b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
3. Adjust:
• Headlight beam (horizontally)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the adjusting knob "2" in direction "a"
or "b".
Left headlight
Direction "a"
Headlight beam moves to the right.
Direction "b"
Headlight beam moves to the left.
Right headlight
Direction "a"
Headlight beam moves to the left.
Direction "b"
Headlight beam moves to the right.
ELECTRICAL SYSTEM
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
4. Install:
Front cowling inner panels
Refer to "GENERAL CHASSIS" on page 4-
1.
3-37