Set Date And Time - AT&T CL4939 Quick Start Manual

Set date and time

Follow the steps below to set the date and time.
Press MENU repeatedly until the screen shows SET TIME/DATE.
1.
. Press SELECT to show MM/DD/YYYY.
3. Use the dial pad keys (0 through 9) to set the blinking digits. To enter a
number that is less than 10, you must enter a zero (0) before the number.
Use DIR/ or CID/
Press SELECT. The screen shows hh:mm AM/PM.
.
Use the dial pad keys (0 through 9) to set the blinking digits. To enter a
5.
number that is less than 10, you must enter a zero (0) before the number.
For example: To enter two o'clock, you must enter 02. To enter the month
of March, you must enter 03.
Press DIR/
6.
Press SELECT or MENU to save the new setting and move to the next
.
option.
NOTES:
• If the date and time are not set and the telephone is powered up, SET CLOCK
flashes on the screen.
• The month, date and time will be set automatically by incoming caller
ID information only if you subscribe to caller ID service provided by your
telephone service provider (see About caller ID on page 3 of the user's
manual).
• Setting the date and time in this menu also sets the time for the answering
system. Before playing each message, the answering system announces the
day and time the message was received (see Information about messages
on page 6 of the user's manual). Before using the answering system, use this
menu to set the year so that the system can determine the correct day of the
week. If you do not subscribe to caller ID service provided by your telephone
service provider, you also have to set the day and time, so that messages are
dated correctly.
to move to the next or previous digit.
to select A (for AM) or CID/ to select P (for PM).
5