Manual Email Addressing - Panasonic UF-6300 Operating Instructions Manual

Manual Email Addressing

1
Set document(s) face down.
2
To choose Manual Email Addressing mode.
3a
Enter the full email address using the Character keys (Up
to 60 characters).
Ex:
a b c
If you make a mistake, press
and then re-enter the correct character.
3b
Enter the User portion of the email address and press
. The machine will complete the email address
Set
with the Default Domain preprogrammed in the User
(Internet) Parameters. (
the email address)
3c
If you want to send to a different Domain, enter the first
part of an email address, press
or key to display domain names in the Selectable
Domains List. Choose the desired domain and press
.
Start
To use this method, you must first preprogram the
Selectable Domain Names into the Selectable Domain.
(See Note 3 and page 51)
4
The document(s) is stored into the memory with a file
number. Then the unit connects to the LAN and starts
sending the email message.
1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialler is Full
NOTE
(More than 70 full email addresses are entered or 70 transmission reservations including G3
communication have been already reserved).
2. If the transmission cannot be completed for any reason, the email may be returned
undelivered; otherwise no reply will be printed.
3. For the machine to perform the email address completion the Fax Parameter No. 160
(DEFAULT DOMAIN) must be set to "VALID" and the DEFAULT DOMAIN must be
preprogrammed in the User (Internet) Parameters. (See pages 24 and 40)
Sending Documents via LAN
p a n a s o n i c
c o m
Clear
Ex:
will add "panasonic.com" to
ENTER STATION(S)
THEN PRESS START 00%
ENTER EMAIL ADDRESS
abc@panasonic.com
to delete the character
abc
abc@panasonic.com
and use the
* STORE *
* STORE * COMPLETED
TOTAL PAGES=005
ON LINE * MEM.MXT *
abc@panasonic.com
NO.001
PAGES=001 01%
25%
43