Table of Contents
Advertisement
Manual Email Addressing
1
Set document(s) face down.
2
EMAIL
To choose Manual Email Addressing mode.
3a
Enter the full email address using the Character keys (up
to 60 characters).
Ex:
a b c
If you make a mistake, press
then re-enter the correct character.
3b
Enter the User portion of the email address and press
. The machine will complete the email address
SET
with the Default Domain preprogrammed in the User
(Internet) Parameters. (i.e. will add "panasonic.com" to
the email address)
3c
If you want to send to a different Domain, enter the first
part of an email address, press
or
key to display domain names in the Selectable
Domains List. Choose the desired domain and press
. (See Note 3 and page 99)
START
4
The document(s) is stored into memory with a file number.
Then connects to the LAN and starts sending the email
message.
1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialler is Full
NOTE
(more than 70 full email addresses are entered or 70 transmission reservations including G3
communication have been already reserved).
2. If the transmission cannot be completed for any reason, the email may be returned
undelivered; otherwise no reply will be printed.
3. For the machine to perform the email address completion the Fax Parameter No. 160
(DEFAULT DOMAIN) must be set to "Valid" and the DEFAULT DOMAIN must be
preprogrammed in the User (Internet) Parameters. (See page 50)
Sending Documents via LAN
p a n a s o n i c
c o m
CLEAR
ENTER STATION(S)
THEN PRESS START 00%
❚
ENTER EMAIL ADDRESS
abc@panasonic.com
to erase the character
abc
abc@mgcs.com
and use the
* STORE *
* STORE * COMPLETED
TOTAL PAGE=005
ON LINE * MEM.MXT *
ID:abc@panasonic.com
NO.001
PAGES=001
01%
25%
91
Advertisement
Table of Contents
