Panasonic UF-6300 Operating Instructions Manual page 39

No. Parameter
137 RE-ENTER D. DIAL
140 LAN RELAY XMT REQ
142 RELAY XMT
143 RELAY XMT REPORT
144 EMAIL CHARACTER
SET
145 SENDER SELECTION
146 POP TIMER
147 AUTO POP RCV
148 DELETE POP RCV
EMAIL
149 DELETE POP ERR
EMAIL
150 IFAX RETURN
RECEIPT
151 EMAIL HEADER
FORMAT
152 SUB-ADDRESS
ROUTING
153 TSI ROUTING
Setting
Setting
Number
1 INVALID Used to set whether to display the address re-enter screen
when indicating the address for direct dial, when inputting
2 VALID
the mail address for Internet FAX, when redialling or when
inputting the address for confirming the address. When set
to "VALID", unit will require input destination Tel No. or Mail
address twice for confirmation. Unit will proceed transmit
job when destination data is matched.
This setting is not available when the Restrict Direct Dial
function is set to "VALID".
1 INVALID Selecting whether the machine performs LAN Relay XMT
Request.
2 VALID
1 INVALID Selecting whether the machine accepts and performs G3
relayed transmission. (Relay Station Functions)
2 VALID
1 OFF Setting how the COMM. Journal for relayed transmission
is sent to the originator.
2 ALWAYS
Off
3 INC. ONLY
ALWAYS : Always send.
INC. ONLY: Send only if communication has failed.
1 JAPANESE Selecting the Character Set when receiving or sending
email text.
2 ENGLISH
1 INVALID Selecting a pre-programmed sender's name and email
address before each transmission.
2 VALID
---- 0 to 60 min. Setting the time interval for the machine to check for email
on the POP Server.
3
(0 = Does not check the POP Server for email.)
1 INVALID Selecting whether the machine automatically downloads
an email from the POP Server.
2 VALID
1 INVALID Selecting whether the email will be deleted automatically
after retrieval from the POP Server.
2 VALID
1 INVALID Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 VALID
1 INVALID Selecting whether to send a return receipt when receiving
from another Panasonic Internet Fax.
2 VALID
1 ALL Selecting the header information to print when an email is
received. (Normally used for Troubleshooting. It shows
2 SUBJECT/
the path of the email transmission before arriving at your
FROM/TO
machine.)
3 OFF
1 INVALID Selecting whether to automatically route a received fax or
email using ITU-T Sub-address.
2 VALID
1 INVALID Selecting whether to route a received fax to a telephone
number or an email address preprogrammed in Phone
2 VALID
Book using the originating fax's Numeric ID (TSI frame
information).
Customizing Your Machine
Comments
: Don't send.
Continued on the next page...
39