Panasonic UF-6300 Operating Instructions Manual page 28

Programming Email Address and Telephone Numbers
Programming the Auto Dialler
8
NOTE
28
To record another number, repeat Steps 4 to 8.
To return to standby, press
1. If you require a special access number to get an outside line, enter it first and then press
Redial/Pause
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a "/"). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex:
9 PAUSE * 5551234
3. If you enter the Station name with the Fax Parameter 172 (DIRECT IFAX XMT) set to "VALID",
you are allowed to select the usage of Direct IFAX XMT.
.
Sto p
. A hyphen "-" is displayed for pause.
ABBR.[ ]
ENTER ABBR NO.