Setting Up Your Machine For Relayed Transmission - Panasonic UF-6300 Operating Instructions Manual

Relayed Transmission

Setting up Your Machine for Relayed Transmission

Programming the End Receiving Station into your Auto Dialler
If the Fax Parameter No. 140 (LAN RELAY XMT REQUEST) is set to "VALID", you can enter the Relay
Address (ABBR No.) by the following procedure.
To set a One-Touch/ABBR for Relayed Transmission Request
1
2
3
4
5
6
7
8
82
7 2
1
Ex:
Press a One-Touch key (01 - 32).
Ex:
To change the input mode (Between "ENTER EMAIL
ADDRESS" and "ENTER TEL. NO."),
press
Enter the telephone number (Up to 36 digits).
If the Relay and the End Receiving Stations are both in
the same area, omit the Country Code and the Area Code
from the End Receiving Station. The End Receiving
Station is a local telephone number as viewed from the
Relay Station.
Enter the station name by using the character keys (Up to
15 characters).
Ex:
R O M E
1:ONE-TOUCH
2:ABBR NO.
ONE-TOUCH< >
PRESS ONE-TOUCH
<01>
ENTER EMAIL ADDRESS
<01>
ENTER TEL. NO.
<01>
3961111234
<01>ENTER NAME
3961111234
<01> ROME
3961111234
<01> RELAY ADDRESS