Panasonic UF-6300 Operating Instructions Manual page 36

Customizing Your Machine
Fax Parameter Table
No. Parameter
34 ENERGY SAVER
35 DAYLIGHT TIME
37 RCV TO MEMORY
38 ACCESS CODE
39 PIN CODE ACCESS
42 CONF. POLLED FILE
43 PASSWORD-XMT
44 PASSWORD-RCV
46 SELECT RCV
47 REMOTE RCV
48 TELEPHONE LINE
49 PSTN ACCESS CODE
36
Setting
Number
1
MODE
2
(3)
1
2
1
2
3
1
SAVE
2
1
2
1
2
1
2
1
2
1
2
Setting
OFF To reduce the power consumption in standby, select
Energy-Saver mode and specify the Delay Time (1 to 120
ENERGY
minutes) for the machine to enter into the selected mode.
SAVER
The Delay Timer setting is only available in the Energy-
(SLEEP)
Saver mode.
OFF
ENERGY SAVER: Saves energy by consuming less
SLEEP mode cannot be selected when the Internet Fax
Option is equipped.
INVALID Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
VALID
at 2:00 am on the last Sunday in March and go back 1
hour at 3:00 am on the last Sunday in October.
(----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown
on the LCD display. (Refer to Operating Instructions (For
Facsimile).)
(----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (Refer to Operating Instructions (For
Facsimile).)
NONE Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (Refer to Operating Instructions
SUFFIX
(For Facsimile).)
PREFIX
INVALID Selecting whether the machine saves the confidential
polled file even after the file is polled once.
VALID
OFF Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
ON
receiving station when transmitting. (Refer to Operating
Instructions (For Facsimile).)
OFF Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
ON
transmitting station when receiving. (Refer to Operating
Instructions (For Facsimile).)
INVALID Selecting whether the machine performs selective
reception. (Refer to Operating Instructions (For
VALID
Facsimile).)
INVALID Selecting whether or not the machine accepts remote
reception command. (Refer to Operating Instructions (For
VALID
Facsimile).)
PSTN Selecting the type of line connected.
PBX
(----) Setting PSTN Access Code. (Up to 4 digits)
Comments
: The unit will remain in standby mode
and consume more energy than when
in the Energy-Saver mode.
power than when in standby mode by
turning off the fuser unit after the
specified time.