Center High-Mounted Stoplamp (Chmsl) - Chevrolet 2006 Epica Owner's Manual

Center High-Mounted Stoplamp
(CHMSL)
To replace a CHMSL bulb, do the following:
1. From inside the vehicle, locate the center
high-mounted stoplamp (CHMSL) housing on
the underside of the rear window shelf.
5-42
2. Pry off the lamp housing with a flat tool.
3. Remove the bulb socket.
4. Remove the bulb by pulling it straight out of
the bulb socket.
5. Install the new bulb.
6. Install the bulb socket into the CHMSL.
7. Push the CHMSL housing back into its
original position.