Front Turn Signal Lamps - Chevrolet 2006 Epica Owner's Manual

Hide thumbs Also See for 2006 Epica:

Table of Contents

Front Turn Signal Lamps

To replace a front turn signal lamp (A) bulb, do the

1. Open the hood. See Hood Release on page 5-11

for more information.

2. Reach behind the headlamp assembly to locate the

front turn signal bulb socket.

3. Disconnect the wiring harness connector from the

bulb socket.

4. Turn the front turn signal bulb socket

counterclockwise and pull it out of the lamp housing.

5. Press the bulb inward and turn it counterclockwise

to remove it from the bulb socket.

6. Install the new bulb into the socket by pressing it in

and turning it clockwise.

7. Reverse Steps 1 through 4 to reinstall.

Table of Contents