Taillamps, Turn Signal, Stoplamps And Back-Up Lamps; Replacement Bulbs - Chevrolet 2006 Epica Owner's Manual

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace one of these bulbs, do the following:
1. Open the trunk. See Trunk on page 2-10 for
more information.
2. Open the trim cover by releasing the clip at the
top of the cover.
A. Stoplamp/Taillamp
B. Turn Signal Lamp
3. Remove the bulb socket by turning it
counterclockwise.
5-44
C. Back-up Lamp
4. Remove the bulb from the socket by pressing
the bulb and turning it counterclockwise.
5. Install the appropriate bulb into the socket.
6. Replace the bulb socket into the lamp housing.
Twist the bulb socket clockwise to secure.
7. Close the trim cover.

Replacement Bulbs

Exterior Lamp
Back-up
Center High-Mounted Stoplamp
(CHMSL)
Front Parking and Turn Signal
Headlamp
High-beam
Low-beam
Stoplamp and Taillamp
Turn Signal Lamp - Rear
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
94535571
94535587
94535578
94535541
94535546
94535574
94535572