5. Remove the headlamp cap.
6. Disconnect the two wiring harness connectors
located on each side of the headlamp assembly.
5-40
7. Remove the old bulb.
•
To remove the high-beam headlamp bulb,
release the spring that retains the bulb.
•
To remove the low-beam headlamp bulb,
turn the bulb counterclockwise.
8. Install the new bulb.
•
To replace the high-beam headlamp bulb,
install the bulb retaining spring.
•
To replace the low-beam headlamp bulb,
turn the bulb clockwise.
9. Connect the wiring harness connector to the bulb
and replace the headlamp cap.
10. Reverse Steps 1 through 6 to reinstall the headlamp
assembly.