2. Disconnect the electrical connector from
the fog lamp bulb by pressing the
connector release and pulling the
connector straight out of the fog
lamp bulb.
3. Remove the bulb from the housing by
squeezing the two release tabs and
pulling it straight out of the assembly.
4. Replace the bulb and reverse Steps 1 3 to
reinstall.
Taillamps
1. Back-Up Lamp
2. Stoplamp/Taillamp/Turn Signal Lamp
To replace one of these bulbs:
1. Remove the four screws.
2. Lift the lens off the lamp assembly.
3. Turn the old bulb counterclockwise and
pull it straight out from the socket.
Center High-Mounted Stoplamp
(CHMSL) and Cargo Lamp
1. Cargo Lamp Bulbs
2. Center High-Mounted Stoplamp
(CHMSL) Bulb
Vehicle Care
To replace one of these bulbs:
1. Remove the two screws and lift off the
lamp assembly.
2. Turn the bulb socket counterclockwise
and pull it straight out.
3. Pull the bulb straight out from the
socket.
Electrical System
Electrical System Overload
The vehicle has fuses and circuit breakers to
protect against an electrical system
overload.
293