Exterior Lamps - Chevrolet 2006 Epica Owner's Manual

Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase your speed.
When you take your foot off the pedal, your vehicle will
slow down to the cruise control speed you set earlier.
Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon your speed, load and the steepness of the
hills. When going up steep hills, you may have to
step on the accelerator pedal to maintain your speed.
When going downhill, you may have to brake or shift
to a lower gear to keep your speed down. Of course,
applying the brake pedal takes you out of cruise control.
Many drivers find this to be too much trouble and do
not use cruise control on steep hills.
Ending Cruise Control
There are two ways to turn off the cruise control:
•
Step lightly on the brake pedal.
•
Press the ON-OFF button on the cruise
control lever.
Erasing Speed Memory
When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.
3-12

Exterior Lamps

The lever on the left side of the steering column
operates the exterior lamps.
The exterior lamp band has three positions:
23 (Headlamps): Turn the band to this position to
turn on the headlamps, together with the following:
•
Taillamps
•
License Plate Lamp
•
Instrument Panel Lights
Your headlamps only work when your ignition is
turned to ON.