Removing The Flat Tire And Installing The Spare Tire - Chevrolet 2006 Epica Owner's Manual

Removing the Flat Tire and
Installing the Spare Tire
1. If your vehicle has wheel covers, loosen the
four plastic caps by hand or by using the wheel
wrench. The plastic nuts do not come off.
2. Remove the wheel cover using the flat end of
the jack handle or the screwdriver. Pry along
the edge of the wheel cover until it comes off.
3. Use the wheel wrench to loosen all the wheel nuts.
Do not remove them yet.
4. Locate the notch in the frame near each wheel
which the jack head fits in.
5. Position the jack and raise the jack head until it
fits firmly into the notch in the vehicle's frame
nearest the flat tire.
6. Put the compact spare tire near you.
5-63