Using The Instrumented Calibration Mode For Duplex Printers - Kodak D4000 User Manual

Using the Instrumented
Calibration Mode for
Duplex Printers
November 2011
The status appears on the screen.
13. Repeat Steps 7-12
target.
When all of the rows of patches are successfully read, the new
calibration table is automatically generated and sent to the
printer.
14. Calibration is complete. Click Yes if you would like to calibrate
another printer. Click No to exit the Calibration Application.
1. Launch the KODAK Photo Printer Calibration Application.
2. At "KODAK Photo Printer Calibration Application", select:
• your printer model.
• the printer name and serial number.
• the starting calibration setting
– Current printer settings—use the current printer
settings as the starting point.
– Default printer settings—use the default printer settings
as the starting point.
• Instrumented for the Calibration Method.
Using the Calibration Application
for each row of patches on the calibration
3-7