3
Using the Calibration Application
Using the Visual Calibration Mode
Using the Visual
Calibration Mode for
Simplex Printers
November 2011
Calibrate your printer whenever the color of the prints is not what
you expect. You may also want to calibrate the printer after it has
been serviced.
You can calibrate using the visual calibration mode or the
instrumented calibration mode.
NOTE: To use the instrumented calibration mode, you must have:
• an X-RITE i1PRO Device connected to your computer.
• the X-RITE i1PRO software installed on your computer.
Never print from another application during a
IMPORTANT:
calibration session. This could leave the printer
calibration in an unknown state.
Use the visual calibration mode to calibrate KODAK simplex
(single-sided) or duplex (double-sided) Printers.
1. At the "KODAK Photo Printer Calibration Application" dialog
box, select:
• your printer model
• the printer name and serial number
• the starting calibration setting:
– Current printer settings—use the current printer
settings as the starting point.
– Default printer settings—use the default printer settings
as the starting point.
• Visual for the Calibration Method
2. Click Start Printer Calibration.
3-1