Switching On For The First Time: Installing The Software - Fujitsu ESPRIMO P556 Operating Manual

Getting started
Switching on for the first time: installing the software
Installing, Software, Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process must not be interrupted.
You may need the licence number for Windows during the installation. You can find the licence
number as a label on your device (no longer applies to Windows 8 or higher).
16 Fujitsu