Triggering A Self-Timer Operation With Motion - Casio EX-10 User Manual

Triggering a Self-timer Operation with Motion (Handsfree)
With the Handsfree Mode, the camera automatically
triggers a self-timer countdown whenever it detects
movement in the vicinity of an icon on the monitor
screen. This means you can control operation of the
self-timer from a distance by waving your hand, so you
can include yourself in the image being shot.
1.
Select one of the following as the recording
mode: Program Auto, Premium Auto Pro, or
HS Best Selection or Brightening (BEST SHOT scene).
• Movie shooting is disabled while the HS Best Selection BEST SHOT scene is
being used.
2.
Tilt the camera's monitor screen upwards 180 degrees (page 19).
• Under initial factory default settings, the camera will automatically enter the
Handsfree Mode whenever the monitor screen is tilted upwards 180 degrees.
3.
Rotate the function ring to reposition the self-timer start icon "
the location in the image where you want movement to be detected.
• If you also want to reposition the preview icon "
rotate the function ring.
4.
After the icons are in the positions you want, press [SET].
5.
Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
The start self-timer icon will change to "
standby for shooting.
6.
Facing the camera, move your hand or perform some other movement
in the vicinity of the
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
NOTE
• In the case of snapshot shooting, the camera will return to standby after an image
is shot. The camera will automatically exit standby after 30 snapshots are shot
using the Handsfree Mode.
• Any one of the following will automatically exit standby: pressing the shutter button,
changing the tilt orientation of the monitor screen, or turning the camera upside
down.
• The Handsfree Mode may not operate properly when there is little difference
between the subject and the background of the icon, or when the subject is located
far away from the camera.
" to indicate that the camera is in
(start self-timer) icon on the monitor screen.
70
", press [RING] and then
Snapshot Tutorial
" to