Zooming An On-Screen Image - Casio EX-10 User Manual

Zooming an On-screen Image

1.
In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2.
Rotate the zoom controller towards z ([) to
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. You can also use the
control dial to scroll upwards and downwards, and the
function ring to scroll left and right. Rotate the zoom
controller towards w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to the full 8X.
• Pressing [SET] will lock the current zoom factor for the on-screen image. You
can then use [4] and [6] to scroll between images, using the same zoom
factor. Pressing [SET] again will unlock the zoom factor and allow you to use
[8], [2], [4] and [6] to move around the currently displayed images. This
function cannot be used while viewing CS or bracketing group images or
movies. Also, these group images and movies will not appear when you are
scrolling images with [4] and [6].
135
Zoom factor
Image area
Current display area
Viewing Snapshots and Movies