Table of Contents
Advertisement
Problem
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory
defaults when I
remove the
camera's battery.
Buttons are not
responsive right
after the power has
been turned on.
Display Messages
ALERT
Battery is low.
Can not find the file.
Card ERROR
Check connections!
Communication
stopped.
File could not be
saved because
battery is low.
B
Possible Cause and Recommended Action
Load the camera's battery and reconfigure the time and date
settings (page 27). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera's setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
The camera's protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery power is low.
The image you specified with the slideshow "Images"
setting cannot be found. Change the "Images" setting (page
140) and try again.
There is something wrong with the memory card. Turn off
the camera, remove the memory card and then reload it
into the camera. If this message re-appears when you turn
the camera back on, format the memory card (page 194).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
You are attempting to connect the camera to a printer while
the camera's USB settings are not compatible with the USB
system of the printer (page 166).
This message appears when the wireless LAN connection
is broken for some reason during data communication
between the camera and smartphone.
Battery power is low, so an image file could not be saved.
219
Appendix
Advertisement
Table of Contents
