Assigning Functions To The Control Dial - Casio EX-10 User Manual

Assigning Functions to the Control Dial (Key Customize)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab *
Key Customize
You can assign any one of the functions below to the Control Dial. After you do, you
can change the setting of the function by rotating the Control Dial, or by pressing the
left/right keys or up/down keys.
Operation
* 1
Control Dial
* 2
L/R Key ,
U/D Key
*1
The control dial operates as described below in the M (Manual Exposure)
recording mode.
• When a function other than "Aperture" is assigned to the function ring (page
45), rotating the control dial adjusts aperture.
• When "Aperture" is assigned to the function ring, rotating the dial adjusts
shutter speed.
*2
When the focus mode is Manual Focus (MF), focus can be adjusted using the left/
right keys.
Setting
EV Shift
White Balance
ISO
ISO High Limit
Self-timer
Focus
Off
CS
ND Filter
White Balance
ISO
ISO High Limit
Off
Description
Exposure compensation
Hue Adjustment
Changes the ISO sensitivity
setting.
Specifies the ISO sensitivity high
limit.
Selects the self-timer time.
Changes the focus mode.
No function assigned to the dial.
Enters the CS Mode.
Reduces light intensity.
Hue Adjustment
Changes the ISO sensitivity
setting.
Specifies the ISO sensitivity high
limit.
No function assigned to the [4],
[6], [8] and [2] keys.
107
See page:
Page 54
Page 47
Page 51
Page 113
Page 46
Page 49
Page 65
Page 108
Page 47
Page 51
Page 113
Advanced Settings (REC MENU)