Using The Auto Focus Assist Light - Casio EX-10 User Manual

Using the Auto Focus Assist Light (AF Assist Light)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab *
AF Assist Light
Half-pressing the shutter button while this setting is selected
causes the front lamp to light, which provides illumination for
focusing in areas where lighting is dim. Leaving this function
turned off is recommended when shooting portraits from short
distances, etc.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Turning on Image Review (Review)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Review
While Review is turned on, the camera will display an image for about one second
immediately after it is recorded. Note, however, that images remain on the monitor
screen only when the "Type 4" option is selected.
Type 1
Type 2, Type 3
Type 4
Off
• When shooting with some functions while "Type 1" is selected for "Review" will
cause the message "Busy... Please wait..." to appear after you press the shutter
button. Shooting another image is disabled while this message is displayed. Wait a
while until the process being performed is complete.
• The Review image may not appear when shooting with some recording modes.
• When shooting with "Intelligent Bracketing", "High Speed CS", "AF CS", or "Triple
Shot", the Review image is displayed as "Type 2" if "Type 1" is selected as the
Review image type.
• Shooting an "ART SHOT" image while "On" is selected for the "Double (HDR Art)"
setting and Review is enabled will cause both the "ART SHOT" image and the
normal image to be displayed as the Review image.
Displays a full-screen view of the image.
Displays a partial-screen view of the image. The difference
between Type 2 and Type 3 is the way the image appears on
the display.
Displays images along the right side and the bottom of the
monitor screen. The newest image is always shown in the
upper right.
Turns off review image display
121
Front lamp
Advanced Settings (REC MENU)