Triggering A Self-Timer Operation With Motion - Casio EX-100F User Manual

Triggering a Self-timer Operation with Motion (Motion Shutter)
With this feature, the camera automatically triggers a
self-timer countdown whenever it detects movement in
the vicinity of an icon on the monitor screen. This means
you can control operation of the self-timer from a
distance by waving your hand, so you can include
yourself in the image being shot.
1.
Select one of the following as the recording
mode: Program Auto, Premium Auto Pro, or
HS Best Selection or Make-up (BEST SHOT scene).
• Movie shooting is disabled while the HS Best Selection BEST SHOT scene is
being used.
2.
Tilt the camera's monitor screen upwards 180 degrees (page 19).
• Under initial factory default settings, the camera will automatically enter the
Motion Shutter Mode whenever the monitor screen is tilted upwards
180 degrees.
3.
Rotate the function ring to reposition the self-timer start icon "
the location in the image where you want movement to be detected.
• If you also want to reposition the preview icon "
rotate the function ring.
4.
After the icons are in the positions you want, press [SET].
5.
Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
The start self-timer icon will change to "
standby for shooting.
6.
Facing the camera, move your hand or perform some other movement
in the vicinity of the
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
NOTE
• In the case of snapshot shooting, the camera will return to standby after an image
is shot. The camera will automatically exit standby after 30 snapshots are shot
using the Motion Shutter.
• Any one of the following will automatically exit standby: pressing the shutter button,
changing the tilt orientation of the monitor screen, or turning the camera upside
down.
" to indicate that the camera is in
(start self-timer) icon on the monitor screen.
74
", press [RING] and then
Snapshot Tutorial
" to