Triggering A Self-Timer Operation With Motion - Casio EX-ZR62 User Manual

Triggering a Self-timer Operation with Motion (Motion Shutter)
With Motion Shutter, the camera automatically triggers a
self-timer countdown whenever it detects movement in
the vicinity of an icon on the monitor screen. This means
you can control operation of the self-timer from a
distance by waving your hand, so you can include
yourself in the image being shot.
1.
Select one of the following as the recording
mode: Program Auto, Premium Auto Pro, or
Make-up (BEST SHOT scene).
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select "r REC MENU" tab, and then
press [6].
4.
Use [8] and [2] to select "Motion Shutter", and then press [6].
5.
Use [8] and [2] to select "Motion Settings", and then press [SET].
6.
Use [8] and [2] to select "Always" or "180°only", and then press
[SET].
• If you select "180°only", go to step 7. Selecting "Always" activates Motion
Shutter. Advance to step 8.
7.
If you selected "180°only" in step 6 above, tilt the camera's monitor
screen 180 degrees (page 17).
This activates Motion Shutter.
8.
Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
• About three seconds after you press the shutter button or [0] (Movie) button,
the camera will go into standby. This will cause the self-timer icon "
change from flashing to blue.
9.
Facing the camera, move your hand or perform some other movement
in the vicinity of the
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
(start self-timer) icon on the monitor screen.
61
" to
Snapshot Tutorial