Operator Controls; Operate Switch; Control Panel; Panel Functions - Epson Stylus C41 Service Manual

Stylus C41/42/43/44 series

1.2 OPERATOR CONTROLS

1.2.1 Operate Switch

Operate switch is located on the control panel.

1.2.2 Control Panel

V
Switches
There are 2 non-lock type push switches, and 2 LED.
V
Indicators
(1) Power (green)
Lights when the operate switch is "ON", and AC power is supplied.
(2) Error (red)
Lights or blinks when some error occurs to the printer.

1.2.3 Panel Functions

V
Panel Functions
SW
• Loads or Ejects the Paper(Pushing within 3seconds).
• Starts the Cleaning of head(Pushing for 3seconds)
Error Reset SW
• When carriage is on the Ink Cartridge change position, return
carriage from Ink Cartridge change position.
• Starts the Ink Cartridge change (Pushing for 6seconds)
*This function is not available in printing status.
V
Panel Function with Power on
SW
Error Reset SW
PRODUCT DESCRIPTION
Function
Function
Starts status printings
OPERATOR CONTROLS

1.2.4 Printer Condition and Panel Status

Printer status
Power ON condition
Ink sequence
Ink Cartridge change mode
Data processing
Paper Out *1
Paper jam condition*1
Ink end(Black)*1
Ink level low(Black)
Ink end(Color)*1
Ink level low(Color)
Ink end (Black and Color)
No Ink Cartridge (Black or Color)*1
Maintenance request
(Ink Overflow Counter error)
Fatal error*1
"-":Indicator status don't change
"a->b":a is a Indicator condition when carriage is on Home Position.
b is a Indicator condition in Ink exchange sequence.
*1 : see "Errors" on page -12.
Revision B
Indicators
Powe Error Priority
On - 10
Blink - 6
Blink - 5
Blink - 9
- On 4
- On 3 3
- On->On 8
- Blink->Blink 8
- On->On 8
- Blink->Blink 8
- On->On 8
- On 7
Alt blink Alt blink 2
Off On 1
11