Table of Contents
Advertisement
Stylus C41/42/43/44 series
3.1.9 Top margin
This function can be used to change the top margin value.
You are required to perform this adjustment after performing the following operations.
T
Removing or replacing the ASF unit.
T
Removing or replacing the LD unit.
T
Replacing the Printer mechanism
T
Replacing the main board
1.
Choose the "Top margin" in the Adjustment menu.
Figure 3-20. Choose the Top margin menu
Adjustment
2.
Choose the "Print the Top margin" in the "Top margin adjustment" and click the
"OK" button.
Figure 3-21. Top margin adjustment pattern
3.
Check that the printed horizontal line is in 2.6mm ~ 7.2mm from the top of the
paper. If it is out of the specific range, perform the Top Margin adjustment by the
following procedure.
4.
When adjusting the top margin, select "Adjust" from "Top margin adjustment",
the click the "OK" button.
Overview
Revision B
45
Hide quick links:
Advertisement
Table of Contents
